Designed to house electrical controls, instruments and components in areas which may be regularly hosed down or are in very wet or oily conditions. Provides protection from dust, dirt, oil, and water. For outdoor applications a drip shield is recommended
- 1.2 mm stainless steel Type 304.
- Seams continuously welded and ground smooth.
- Flange trough collar around all sides of door opening.
- Pour in place oil & water resistant gasket
- Standoffs provided for mounting optional panels.
- Removable hinges.
- Doors open 180 degrees.
- Black mini quarter turn latches.
- Latches are opened or closed with a screwdriver.
- Sealing washers and hole plugs included.
- Ground stud on door and body.
- Mounting feet included.
- Optional latches available.
Material
• Type 304 or 316L stainless steel
• Stainless steel hardware
• brushed finish
Body:
Folded and seam welded.
Door:
Corner formed in one piece. Surface mounted with 130° opening. Concealed
AISI 304 stainless steel hinges with captive pin. Can be mounted to give left or right
hand opening. For AISI 316L, sealing is ensured by an injected one piece silicone
gasket. Located on the inside of the door, are four welded studs for the mounting of
equipment profles.
Lock:
BJSS stainless steel customized zamak double-bit 3 mm lock with 90° movement and anti-vibration
mechanism. 1000 mm high enclosures and above have espagnolette three point
locking. Stainless steel lock and other versions are available as accessories.
Mounting plate:
The mounting plate is easy to install component
Cable access:
gland plate openings as standard to maximise sealing
Protection:
Corresponds with IP 66 | TYPE 4X, 12, 13 | IK 10.
Finish:
Polish finish
Delivery:
Enclosure with door, mounting plate, metallic key and mounting accessories.
Additional information or notes:
For outdoor environments exposed to precipitation the use of a rain hood is advised,
also in environments known for quick temperature changes, consideration to
condensation should be taken.
